Normas – Add Additive

Biblioteca de Normas (pps5)

NORMA	ESTADO	APLICABILIDADE	RESUMO	ULTIMA ATUALIZAÇÃO
ISO/AWI 27548 Additive manufacturing of plastics — Environment, health and safety — Test method for determination of particle and chemical emission rates from desktop 3D printer material extrusion	20.00 UNDER DEVELOPMENT Preparatory: New project registered in TC/SC work programme	Polímeros	This document specifies test methods to determine particle emissions (including ultrafine particles) and specified VOCs (including aldehydes) from Material Extrusion(ME) processes often used in non-industrial environments such as school, homes and office spaces in an Emission Test Chamber (ETC) under specified test conditions. However, these tests may not accurately predict real-world results. This document describes a conditioning method using an ETC with controlled temperature, humidity, air exchange rate, air velocity, and procedures for monitoring, storage, analysis, calculation, and reporting of emission rates. This document is intended to cover a Fused Filament Fabrication (FFF) type desktop 3D printer using thermoplastic materials. The primary purpose of this document is to quantify particle and chemical emission rates emitted from a specific ME type desktop 3D printer which is operated using thermoplastic feedstocks. However, not all possible emissions are covered by this method. Many feedstocks could release hazardous emissions that are not measured by the chemical detectors prescribed in this document. It is the responsibility of the user to understand the material being printed and the potential chemical emissions. An example is PVC feedstocks that could potentially emit chlorinated compounds, which would not be measured by this document.	01/01/1970
ISO/ASTM AWI 52953 Additive Manufacturing for metals — General Principles — Registration of geometric data acquired from process-monitoring and for quality control	20.00 UNDER DEVELOPMENT Preparatory: New project registered in TC/SC work programme	Metais	This document sets and defines the minimum requirements for registration of geometric data acquired from process-monitoring and for quality control in Additive Manufacturing (AM), including the description of a procedure. Furthermore, this document comprises actions that users need to register multi-modal AM data and store them in an appropriate repository. This document is not applicable for the following types of data: data cleansing, image processing, cost, production time and personnel. This document in only applicable for geometric data gathered and generated from non-destructive test methods and sensors by using X-ray Computer Tomography (XCT), cameras and Coordinate Measuring Machines (CMM). This document is only applicable to metals produced through means of Laser-based powder bed fusion (PBF-LB) and Direct Energy Deposition (DED). Note: The procedure can be applied to monitor other AM processes and materials (e.g. polymer or ceramic power bed fusion, binder jetting, and photopolymerization), but this document does not provide any data or case studies for them.	01/01/1970
ISO/ASTM 52925:2022 Additive manufacturing of polymers — Feedstock materials — Qualification of materials for laser-based powder bed fusion of parts	60.60 PUBLISHED International Standart published	Polímeros	This document provides guidance and recommendations for the qualification of polymeric materials intended for laser-based powder bed fusion of polymers (PBF-LB/P). The parameters and recommendations presented in this document relate mainly to the material polyamide 12 (PA12), but references are also made to polyamide 11 (PA11). The parameters and recommendations set forth herein cannot be applicable to other polymeric materials.	01/01/1970
ISO/DIS 23704-3 General requirements for cyber-physically controlled smart machine tool systems (CPSMT) — Part 3: Reference architecture of CPSMT for additive manufacturing	40.60 UNDER DEVELOPMENT Enquiry: Close of voting	Metais; Cerâmicos; Polímeros	-------	01/01/1970
ISO/CD 4631 Measurement of the Electrochemical Localized Corrosion Potential (E-CLCP) for Biomedical Ti Alloys Fabricated via Additive Manufacturing Method	30.60 UNDER DEVELOPMENT Committee: Close of voting/ comment period	Cerâmicos	-------	01/01/1970
ISO/ASTM DIS 52920 Additive manufacturing — Qualification principles — Quality requirements for industrial additive manufacturing sites	40.99 UNDER DEVELOPMENT Enquiry: DIS approved for registration as FDIS	Metais; Cerâmicos; Polímeros	-------	01/01/1970
ISO/ASTM DIS 52924 Additive manufacturing of polymers — Qualification principles — Classification of part properties	40.99 UNDER DEVELOPMENT Enquiry: DIS approved for registration as FDIS	Polímeros	-------	01/01/1970
ISO/ASTM 52950:2021 Additive manufacturing — General principles — Overview of data processing	60.60 PUBLISHED International Standart published	Metais; Cerâmicos; Polímeros	This document covers the principal considerations which apply to data exchange for additive manufacturing. It specifies terms and definitions which enable information to be exchanged describing geometries or parts such that they can be additively manufactured. The data exchange method outlines file type, data enclosed formatting of such data and what this can be used for. This document — enables a suitable format for data exchange to be specified, — describes the existing developments for additive manufacturing of 3D geometries, — outlines existing file formats used as part of the existing developments, and — enables understanding of necessary features for data exchange, for adopters of this document. This document is aimed at users and producers of additive manufacturing processes and associated software systems. It applies wherever additive processes are used, and to the following fields in particular: — producers of additive manufacturing systems and equipment including software; — software engineers involved in CAD/CAE systems; — reverse engineering systems developers; — test bodies wishing to compare requested and actual geometries.	01/01/1970
ISO/ASTM DIS 52921 Additive manufacturing — General principles — Part positioning, coordinates and orientation	40.99 UNDER DEVELOPMENT Enquiry: DIS approved for registration as FDIS	Metais; Cerâmicos; Polímeros	-------	01/01/1970
ISO/ASTM PRF TR 52917 Additive manufacturing — Round robin testing — General guidelines	50.20 UNDER DEVELOPMENT Approval: Proof sent to secretariat or FDIS ballot initiated: 8 weeks	Metais; Cerâmicos; Polímeros	-------	01/01/1970
ISO/ASTM AWI 52933 Additive manufacturing — Environment, health and safety — Consideration for the reduction of hazardous substances emitted during the operation of the non-industrial ME type 3D printer in workplaces, and corresponding test method	20.00 UNDER DEVELOPMENT Preparatory: New project registered in TC/SC work programme	Metais; Cerâmicos; Polímeros	-------	01/01/1970
ISO/ASTM DIS 52935 Additive manufacturing of metals – Qualification principles – Qualification of AM coordination personnel	40.00 UNDER DEVELOPMENT Enquiry: DIS registered	Metais	-------	01/01/1970
ISO/ASTM 52942:2020 Additive manufacturing — Qualification principles — Qualifying machine operators of laser metal powder bed fusion machines and equipment used in aerospace applications	60.60 PUBLISHED International Standart published	Metais	This document specifies requirements for the qualification of operators of laser metal powder bed fusion machines and equipment for additive manufacturing in aerospace applications. This document is applicable if the operator qualification testing is required by contract or by application standards in the field of aerospace.	01/01/1970
ISO/ASTM 52941:2020 Additive manufacturing — System performance and reliability — Acceptance tests for laser metal powder-bed fusion machines for metallic materials for aerospace application	60.60 PUBLISHED International Standart published	Metais	This document specifies requirements and test methods for the qualification and re-qualification of laser beam machines for metal powder bed fusion additive manufacturing for aerospace applications. It can also be used to verify machine features during periodic inspections or following maintenance and repair activities.	01/01/1970
ISO/ASTM DIS 52931 Additive manufacturing of metals — Environment, health and safety — General principles for use of metallic materials	40.99 UNDER DEVELOPMENT Enquiry: DIS approved for registration as FDIS	Metais	-------	01/01/1970
ISO/ASTM TR 52916:2022 Additive manufacturing for medical — Data — Optimized medical image data	60.60 PUBLISHED International Standart published	Metais; Cerâmicos; Polímeros	This document includes the creation of optimized data for medical additive manufacturing (MAM). These data are generated from static modalities, such as magnetic resonance imaging (MRI), computed tomography (CT). This document addresses improved medical image data, and medical image data acquisition processing and optimization approaches for accurate solid medical models, based on real human and animal data. Solid medical models are generally created from stacked 2D images output from medical imaging systems. The accuracy of the final model depends on the resolution and accuracy of the original image data. The main factors influencing accuracy are the resolution of the image, the amount of image noise, the contrast between the tissues of interest and artefacts inherent in the imaging system.	01/01/1970
ISO/CD 52932 Additive manufacturing of polymers — Environment, health and safety — Test method for the determination of particle emission rates from desktop ME printers	30.98 DELETED Committee: Project deleted	Outros	-------	01/01/1970
ISO/ASTM DIS 52909 Additive manufacturing of metals — Finished part properties — Orientation and location dependence of mechanical properties for powder bed fusion	40.99 UNDER DEVELOPMENT Enquiry: DIS approved for registration as FDIS	Metais	-------	01/01/1970
ISO/ASTM DIS 52926-5 Additive Manufacturing of metals — Qualification principles — Part 5: Qualification of operators for DED-Arc	40.60 UNDER DEVELOPMENT Enquiry: Close of voting	Metais	-------	01/01/1970
ISO/ASTM DIS 52926-4 Additive manufacturing of metals — Qualification principles — Part 4: Qualification of machine operators for DED-LB	40.60 UNDER DEVELOPMENT Enquiry: Close of voting	Metais	-------	01/01/1970
ISO/ASTM DIS 52926-3 Additive manufacturing of metals — Qualification principles — Part 3: Qualification of machine operators for PBF-EB	40.60 UNDER DEVELOPMENT Enquiry: Close of voting	Metais	-------	01/01/1970
ISO/ASTM DIS 52926-2 Additive manufacturing of metals — Qualification principles — Part 2: Qualification of machine operators for PBF-LB	40.60 UNDER DEVELOPMENT Enquiry: Close of voting	Metais	-------	01/01/1970
ISO/ASTM DIS 52926-1 Additive manufacturing of metals — Qualification principles — Part 1: General qualification of machine operators	40.60 UNDER DEVELOPMENT Enquiry: Close of voting	Metais	-------	01/01/1970
ISO/ASTM AWI 52938-1 Additive manufacturing of metals — Environment, health and safety — Part 1: Safety requirements for PBF-LB machines	20.00 UNDER DEVELOPMENT Preparatory: New project registered in TC/SC work programme	Metais; Cerâmicos; Polímeros	-------	01/01/1970
ISO/ASTM 52904:2019 Additive manufacturing — Process characteristics and performance — Practice for metal powder bed fusion process to meet critical applications	90.92 PUBLISHED Review: International Standard to be revised	Metais	1.1 This practice describes the operation and production control of metal powder bed fusion (PBF) machines and processes to meet critical applications such as commercial aerospace components and medical implants. The requirements contained herein are applicable for production components and mechanical test specimens using powder bed fusion (PBF) with both laser and electron beams. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appro-priate safety, health, and environmental practices and deter-mine the applicability of regulatory limitations prior to use. 1.3 This international standard was developed in accor-dance with internationally recognized principles on standard-ization established in the Decision on Principles for the Development of International Standards, Guides and Recom-mendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.	01/01/1970
ISO/ASTM 52907:2019 Additive manufacturing — Feedstock materials — Methods to characterize metal powders	60.60 PUBLISHED International Standart published	Metais	This document provides technical specifications for metallic powders intended to be used in additive manufacturing and covers the following aspects: — documentation and traceability; — sampling; — particle size distribution; — chemical composition; — characteristic densities; — morphology; — flowability; — contamination; — packaging and storage. This document does not deal with safety aspects. In addition, this document gives specific requirements for used metallic powders in additive manufacturing.	01/01/1970
ISO/ASTM 52902:2019 Additive manufacturing — Test artifacts — Geometric capability assessment of additive manufacturing systems	90.92 PUBLISHED Review: International Standard to be revised	Metais; Cerâmicos; Polímeros	This document covers the general description of benchmarking test piece geometries along with quantitative and qualitative measurements to be taken on the benchmarking test piece(s) to assess the performance of additive manufacturing (AM) systems. This performance assessment can serve the following two purposes: — AM system capability evaluation; — AM system calibration. The benchmarking test piece(s) is (are) primarily used to quantitatively assess the geometric performance of an AM system. This document describes a suite of test geometries, each designed to investigate one or more specific performance metrics and several example configurations of these geometries into test piece(s). It prescribes quantities and qualities of the test geometries to be measured but does not dictate specific measurement methods. Various user applications can require various grades of performance. This document discusses examples of feature configurations, as well as measurement uncertainty requirements, to demonstrate low and high grade examination and performance. This document does not discuss a specific procedure or machine settings for manufacturing a test piece, which are covered by ASTM F 2971 and other relevant process specific specifications.	01/01/1970
ISO/ASTM CD 52910 Additive manufacturing — Design — Requirements, guidelines and recommendations	30.99 UNDER DEVELOPMENT Committee: CD approved for registration as DIS	Metais; Cerâmicos; Polímeros	This document gives requirements, guidelines and recommendations for using additive manufacturing (AM) in product design. It is applicable during the design of all types of products, devices, systems, components or parts that are fabricated by any type of AM system. This document helps determine which design considerations can be utilized in a design project or to take advantage of the capabilities of an AM process. General guidance and identification of issues are supported, but specific design solutions and process-specific or material-specific data are not supported. The intended audience comprises three types of users: — designers who are designing products to be fabricated in an AM system and their managers; — students who are learning mechanical design and computer-aided design; and — developers of AM design guidelines and design guidance systems.	01/01/1970
ISO/ASTM 52900:2021 Additive manufacturing — General principles — Fundamentals and vocabulary	90.92 PUBLISHED Review: International Standard to be revised	Metais; Cerâmicos; Polímeros	ISO/ASTM 52900:2015 establishes and defines terms used in additive manufacturing (AM) technology, which applies the additive shaping principle and thereby builds physical 3D geometries by successive addition of material. The terms have been classified into specific fields of application. New terms emerging from the future work within ISO/TC 261 and ASTM F42 will be included in upcoming amendments and overviews of this International Standard.	01/01/1970
ISO/ASTM 52901:2017 Additive manufacturing — General principles — Requirements for purchased AM parts	60.60 PUBLISHED International Standart published	Metais; Cerâmicos; Polímeros	ISO/ASTM 52901:2017 defines and specifies requirements for purchased parts made by additive manufacturing. ISO/ASTM 52901:2017 gives guidelines for the elements to be exchanged between the customer and the part provider at the time of the order, including the customer order information, part definition data, feedstock requirements, final part characteristics and properties, inspection requirements and part acceptance methods. ISO/ASTM 52901:2017 is applicable for use as a basis to obtain parts made by additive manufacturing that meet minimum acceptance requirements. More stringent part requirements can be specified through the addition of one or more supplementary requirements at the time of the order.	01/01/1970
ISO 17296-3:2014 Additive manufacturing — General principles — Part 3: Main characteristics and corresponding test methods	90.92 PUBLISHED REVIEW: International Standard to be revised	Metais; Cerâmicos; Polímeros	ISO 17296-3:2014 covers the principal requirements applied to testing of parts manufactured by additive manufacturing processes. It specifies main quality characteristics of parts, specifies appropriate test procedures, and recommends the scope and content of test and supply agreements. ISO 17296-3:2014 is aimed at machine manufacturers, feedstock suppliers, machine users, part providers, and customers to facilitate the communication on main quality characteristics. It applies wherever additive manufacturing processes are used.	01/01/1970
ISO/ASTM 52915:2020 Specification for additive manufacturing file format (AMF) Version 1.2	60.60 PUBLISHED International Standart published	Metais; Cerâmicos; Polímeros	This document provides the specification for the Additive Manufacturing File Format (AMF), an interchange format to address the current and future needs of additive manufacturing technology. This document specifies the requirements for the preparation, display and transmission for the AMF. When prepared in a structured electronic format, strict adherence to an extensible markup language (XML)[1] schema supports standards-compliant interoperability. NOTE A W3C XML schema definition (XSD) for the AMF is available from ISO from http://standards.iso.org/iso/52915 and from ASTM from www.astm.org/MEETINGS/images/amf.xsd. An implementation guide for such an XML schema is provided in Annex A. It is recognized that there is additional information relevant to the final part that is not covered by the current version of this document. Suggested future features are listed in Annex B. This document does not specify any explicit mechanisms for ensuring data integrity, electronic signatures and encryptions.	01/01/1970
ISO/ASTM 52903-1:2020 Additive manufacturing — Material extrusion-based additive manufacturing of plastic materials — Part 1: Feedstock materials	60.60 PUBLISHED International Standart published	Polímeros	This document describes a method for defining requirements for plastic materials used in extrusion-based additive manufacturing (AM) processes. Materials include unfilled, filled, and reinforced plastic materials suitable for processing into parts. These materials can also contain special additives (e.g. flame retardants, stabilizers, etc.). Processes include all material extrusion-based AM processes. This document is intended for use by manufacturers of materials, feedstocks, plastic parts or any combination of the three using material extrusion-based AM. NOTE In some cases, material manufacturers can also be feedstock manufacturers. In other cases, a material manufacturer can supply materials (example: pellets) to a feedstock manufacturer (example: converter of pellets into filaments). This document does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health, and environmental practices and determine the applicability of regulatory limitations prior to use.	01/01/1970
ISO/ASTM CD TR 52918 Additive manufacturing — Data formats — File format support, ecosystem and evolutions	30.00 UNDER DEVELOPMENT Committee: Committee draft (CD) registered	Metais; Cerâmicos; Polímeros	----------------	01/01/1970
ISO/ASTM TR 52912:2020 Additive manufacturing — Design — Functionally graded additive manufacturing	60.60 PUBLISHED International Standart published	Metais; Cerâmicos; Polímeros	The use of Additive Manufacturing (AM) enables the fabrication of geometrically complex components by accurately depositing materials in a controlled way. Technological progress in AM hardware, software, as well as the opening of new markets demand for higher flexibility and greater efficiency in today's products, encouraging research into novel materials with functionally graded and high-performance capabilities. This has been termed as Functionally Graded Additive Manufacturing (FGAM), a layer-by-layer fabrication technique that involves gradationally varying the ratio of the material organization within a component to meet an intended function. As research in this field has gained worldwide interest, the interpretations of the FGAM concept requires greater clarification. The objective of this document is to present a conceptual understanding of FGAM. The current-state of art and capabilities of FGAM technology will be reviewed alongside with its challenging technological obstacles and limitations. Here, data exchange formats and some of the recent application is evaluated, followed with recommendations on possible strategies in overcoming barriers and future directions for FGAM to take off.	01/01/1970
ISO/ASTM TR 52906:2022 Additive manufacturing — Non-destructive testing — Intentionally seeding flaws in metallic parts	60.60 PUBLISHED International Standart published	Metais; Cerâmicos; Polímeros	This document is intended to serve as a best practice for the identification and “seeding” of nondestructively detectable flaw replicas of metal alloy PBF and DED processes. Three seeding categories are described: a) process flaws through CAD design; b) build parameter manipulation; c) subtractive manufacturing. These include flaws present within as-deposited materials, post heat-treated or HIP processed material, and those flaws made detectable because of post-processing operations. Geometrical aspects or measurement are not the subjects of this document. WARNING — This document does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this document to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.	01/01/1970
ISO/ASTM CD 52903-2 Additive manufacturing — Material extrusion-based additive manufacturing of plastic materials — Part 2: Process equipment	30.98 DELETED Committee: Project deleted	Polímeros	This document describes a method for defining requirements and assuring component integrity for plastic parts created using material extrusion based additive manufacturing processes. It relates to the process, equipment and operational parameters. Processes include all material extrusion based additive manufacturing processes. This document is intended for use by AM users and customers procuring such parts.	01/01/1970
ISO/ASTM CD 52903-3 Additive manufacturing — Standard specification for material extrusion based additive manufacturing of plastic materials — Part 3: Final parts	30.98 DELETED Committee: Project deleted	Polímeros	----------------	01/01/1970
ISO/ASTM 52911-2:2019 Additive manufacturing — Design — Part 2: Laser-based powder bed fusion of polymers	60.60 PUBLISHED International Standart published	Polímeros	This document specifies the features of laser-based powder bed fusion of polymers (LB-PBF/P) and provides detailed design recommendations. Some of the fundamental principles are also applicable to other additive manufacturing (AM) processes, provided that due consideration is given to process-specific features. This document also provides a state-of-the-art review of design guidelines associated with the use of powder bed fusion (PBF) by bringing together relevant knowledge about this process and by extending the scope of ISO/ASTM 52910.	01/01/1970
ISO/ASTM 52911-1:2019 Additive manufacturing — Design — Part 1: Laser-based powder bed fusion of metals	60.60 PUBLISHED International Standart published	Metais	This document specifies the features of laser-based powder bed fusion of metals (PBF-LB/M) and provides detailed design recommendations. Some of the fundamental principles are also applicable to other additive manufacturing (AM) processes, provided that due consideration is given to process-specific features. This document also provides a state of the art review of design guidelines associated with the use of powder bed fusion (PBF) by bringing together relevant knowledge about this process and by extending the scope of ISO/ASTM 52910.	01/01/1970
ISO/ASTM DIS 52911-3 Additive Manufacturing — Design — Part 3: Electron beam powder bed fusion of metals	40.99 UNDER DEVELOPMENT Enquiry: DIS approved for registration as FDIS	Metais	ISO/ASTM DIS 52911-3 Fabrico aditivo - Projeto - Parte 3: Fusão de metais em leito de pó de feixe de electrões	01/01/1970
ISO/ASTM TS 52930:2021 Additive manufacturing — Qualification principles — Installation, operation and performance (IQ/OQ/PQ) of PBF-LB equipment	60.60 PUBLISHED International Standart published	Metais; Cerâmicos; Polímeros	----------------	01/01/1970
ISO/ASTM DIS 52936-1 Additive manufacturing of polymers — Powder bed fusion — Part 1: General principles and preparation of test specimens for PBF-LB	40.99 UNDER DEVELOPMENT Enquiry: DIS approved for registration as FDIS	Polímeros	----------------	01/01/1970
ISO 15854:2021 Dentistry — Casting and baseplate waxes	90.92 PUBLISHED Review: International Standard to be revised	Outros	This document specifies the classification of and requirements for dental casting and dental baseplate waxes together with the test methods to be employed to determine compliance with these requirements. This document does not apply to waxes supplied for additive manufacturing or CAD/CAM-based procedures.	01/01/1970
ISO/ASTM 52921:2013 Standard terminology for additive manufacturing — Coordinate systems and test methodologies	90.92 PUBLISHED Review: International Standard to be revised	Metais; Cerâmicos; Polímeros	ISO/ASTM 52921:2013 includes terms, definitions of terms, descriptions of terms, nomenclature, and acronyms associated with coordinate systems and testing methodologies for additive manufacturing (AM) technologies in an effort to standardize terminology used by AM users, producers, researchers, educators, press/media, and others, particularly when reporting results from testing of parts made on AM systems. Terms included cover definitions for machines/systems and their coordinate systems plus the location and orientation of parts. It is intended, where possible, to be compliant with ISO 841 and to clarify the specific adaptation of those principles to additive manufacturing.	01/01/1970
ISO/IEC 23510:2021 Information technology — 3D printing and scanning — Framework for an Additive Manufacturing Service Platform (AMSP)	60.60 PUBLISHED International Standart published	Metais; Cerâmicos; Polímeros	----------------	01/01/1970
ISO 10303-242:2020 Industrial automation systems and integration — Product data representation and exchange — Part 242: Application protocol: Managed model-based 3D engineering	90.92 PUBLISHED Review: International Standard to be revised	Metais; Cerâmicos; Polímeros	This document specifies the application module for AP242 managed model based 3D engineering. The following are within the scope of this document: products of automotive, aerospace and other mechanical manufacturers and of their suppliers, including parts, assemblies of parts, tools, assemblies of tools, and raw materials; engineering and product data for the purpose of long-term archiving and retrieval; product data management breakdown data representing a parent-child structures, such as functional, physical, system or zonal breakdowns. A breakdown is made of breakdown element; product definition data and configuration control data for managing large numbers of variants of products during the design phase; data describing the changes that have occurred during the design phase, including tracking of the versions of a product and of the data related to the documentation of the change process; delta change: data describing the exchange of differences with respect to a set of data previously sent; identification of standard parts, based on international, national, or industrial standards; release and approval data for product data; data that identify the supplier of a product and related contract information; properties of parts or of tools; references to product documentation represented in a format other than those specified by ISO 10303; product manufacturing information, covering the design and manufacturing planning phase; identification of physically realized parts or of tools, including assembly of physically realized products and recording of test results. process planning process plan information describing the relationships between parts and the tools used to manufacture them and to manage the relationships between intermediate stages of part or tool development. mechanical design different types of geometry models, including: 2D- and 3D-wireframe geometry model; geometrically bounded surface geometry model; topologically bounded surface geometry model; faceted-boundary geometry model; boundary geometry model; compound shape geometry model; constructive solid geometry model; parametric and constrained geometry model; 2D-sketch model; 3D tessellated geometry model; 3D scan data; curved triangles. representation of the shape of parts or tools that is a combination of two or more of different types of geometry models; data that pertains to the presentation of the shape of the product; representation of portions of the shape of a part or a tool by manufacturing features; data defining surface conditions; dimensional and geometrical tolerance data; quality criteria and inspection results of given three dimensional product shape data; product documentation as annotated 3D models and as drawings. message data that identify a message and an envelope. interface data representing the interfaces with version management mechanism and the definition of connection with connectors. mating data representing the detailed assembly information on how the involved part occurrences are mated together and which constraints apply. kinematics simulation data for the description of kinematic structures and motion. analysis management data representing an analysis, managed in versions and the link to the result of the analysis. composite design definition of composite structural parts; the association of the constituents of composite and metallic parts with the constituent shape model; the depiction of composite laminate tables describing the material, stacking sequence and ply orientation; constituents of the composite or a portion of the composite with a defined shape; the identification of material specifications from internal and external sources and their properties for a specific operating environment. electrical harness assembly design electrical wire harnesses design; physical electrical harness model for design and construction; electrical connectivity information in multilevel assemblies; wire and cable list data; definition of wire, cable and connector features. additive manufacturing part design build information. requirements management verification and validation.	01/01/1970
ISO/TS 10303-1835:2019 Industrial automation systems and integration — Product data representation and exchange — Part 1835: Application module: Additive manufacturing part and build information	60.60 PUBLISHED International Standart published	Metais; Cerâmicos; Polímeros	ISO/TS 10303-1835:2019 specifies the application module for Additive manufacturing part and build information. The following are within the scope of ISO/TS 10303-1835:2019: additive manufacturing process that use a single build direction perpendicular to a planar build plate; identification of the additive manufacturing build plate; definition of the part build orientation and placement on the build plate; definition of the available build volume of the additive manufacturing machine as a bounding box; providing mechanism to distinguish between the support structure geometry and the part geometry.	01/01/1970
ISO 14649-17:2020 Industrial automation systems and integration — Physical device control — Data model for computerized numerical controllers — Part 17: Process data for additive manufacturing	60.60 PUBLISHED International Standart published	Metais; Cerâmicos; Polímeros	This document specifies the process data for additive manufacturing. This document describes additive manufacturing at the micro process plan level without making a commitment to particular machines, processes or technologies.	01/01/1970
ISO 22910:2020 Corrosion of metals and alloys — Measurement of the electrochemical critical localized corrosion temperature (E-CLCT) for Ti alloys fabricated via the additive manufacturing method	60.60 PUBLISHED International Standart published	Cerâmicos	This document specifies procedures for testing the resistance to localized corrosion of Ti alloys fabricated via additive manufacturing (AM) method. This document regulates the electrochemical critical localized corrosion temperature (E-CLCT) of the AM Ti materials for a comparative evaluation of resistance to localized corrosion.	01/01/1970
ISO 28219:2017 Packaging — Labelling and direct product marking with linear bar code and two-dimensional symbols	60.60 PUBLISHED International Standart published	Metais; Cerâmicos; Polímeros	ISO 28219:2017 - defines minimum requirements for identifying items, - provides guidelines for item marking with machine-readable symbols, - covers both labels and direct marking of items, - includes testing procedures for label adhesive characteristics and mark durability, - provides guidance for the formatting on the label of data presented in linear bar code, two-dimensional symbol or human-readable form, - is intended for applications which include, but are not limited to, support of systems that automate the control of items during the processes of: - production, - inventory, - distribution, - field service, - point of sale, - point of care, - repair, and - is intended to include, but it is not limited to, multiple industries including: - automotive, - aerospace, - chemical, - consumer items, - electronics, - health care, - marine, - rail, - telecommunications. The location and application method of the marking are not defined (these will be reviewed and agreed upon by suppliers and manufacturers and their trading partners before implementing ISO 28219:2017). ISO 28219:2017 does not supersede or replace any applicable safety or regulatory marking or labelling requirements. ISO 28219:2017 is meant to satisfy the minimum item marking requirements of numerous applications and industry groups and as such its applicability is to a wide range of industries, each of which may have specific implementation guidelines for it. ISO 28219:2017 is to be applied in addition to any other mandated labelling direct-marking requirements. The labelling and direct marking requirement of ISO 28219:2017 and other standards can be combined into one label or marking area or appear as separate labels or marking areas. ISO 28219:2017 uses the terms "part marking" and "item marking" interchangeably. Unless otherwise stated, ISO 28219:2017 will use the term "item marking" to describe both the labelling and direct part marking (DPM) of an item, where DPM includes, but is not limited to, altering (e.g. dot peen, laser etch, chemical etch), as well as additive type processes (e.g. ink jet, vacuum deposition). The purpose of ISO 28219:2017 is to establish the machine-readable (linear, two-dimensional, and composite symbols) and human-readable content for direct marking and labelling of items, parts, and components. ISO 28219:2017 provides a means for items, parts and components to be marked, and read in either fixtured or hand-held scanning environments at any manufacturer's facility and then read by customers purchasing items for subsequent manufacturing operations or for final end use. Intended applications include, but are not limited to, supply chain applications, e.g. inventory, distribution, manufacturing, quality control, acquisition, transportation, supply, repair, and disposal. The figures are illustrative and not necessarily to scale or to the quality requirements specified in ISO 28219:2017.	01/01/1970
ISO/TS 10303-442:2019 Industrial automation systems and integration — Product data representation and exchange — Part 442: Application module: AP242 managed model based 3D engineering	90.92 PUBLISHED Review: International Standard to be revised	Metais; Cerâmicos; Polímeros	ISO/TS 10303-442:2019 specifies the application module for AP242 managed model based 3D engineering. The following are within the scope of ISO/TS 10303-442:2019: products of automotive, aerospace and other mechanical manufacturers and of their suppliers, including parts, assemblies of parts, tools, assemblies of tools, and raw materials; engineering and product data for the purpose of long-term archiving and retrieval; product data management breakdown data representing a parent-child structures, such as functional, physical, system or zonal breakdowns. A breakdown is made of breakdown element; product definition data and configuration control data for managing large numbers of variants of products during the design phase; data describing the changes that have occurred during the design phase, including tracking of the versions of a product and of the data related to the documentation of the change process; delta change: data describing the exchange of differences with respect to a set of data previously sent; identification of standard parts, based on international, national, or industrial standards; release and approval data for product data; data that identify the supplier of a product and related contract information; properties of parts or of tools; references to product documentation represented in a format other than those specified by ISO 10303; product manufacturing information, covering the design and manufacturing planning phase; identification of physically realized parts or of tools, including assembly of physically realized products and recording of test results. process planning process plan information describing the relationships between parts and the tools used to manufacture them and to manage the relationships between intermediate stages of part or tool development. mechanical design different types of geometry models, including: 2D- and 3D-wireframe geometry model; geometrically bounded surface geometry model; topologically bounded surface geometry model; faceted-boundary geometry model; boundary geometry model; compound shape geometry model; constructive solid geometry model; parametric and constrained geometry model; 2D-sketch model; 3D tessellated geometry model; 3D scan data; curved triangles. representation of the shape of parts or tools that is a combination of two or more of different types of geometry models; data that pertains to the presentation of the shape of the product; representation of portions of the shape of a part or a tool by manufacturing features; data defining surface conditions; dimensional and geometrical tolerance data; quality criteria and inspection results of given three dimensional product shape data; product documentation as annotated 3D models and as drawings. message data that identify a message and an envelope. interface data representing the interfaces with version management mechanism and the definition of connection with connectors. mating data representing the detailed assembly information on how the involved part occurrences are mated together and which constraints apply. kinematics simulation data for the description of kinematic structures and motion. analysis management data representing an analysis, managed in versions and the link to the result of the analysis. composite design definition of composite structural parts; the association of the constituents of composite and metallic parts with the constituent shape model; the depiction of composite laminate tables describing the material, stacking sequence and ply orientation; constituents of the composite or a portion of the composite with a defined shape; the identification of material specifications from internal and external sources and their properties for a specific operating environment. electrical harness assembly design electrical wire harnesses design; physical electrical harness model for design and construction; electrical connectivity information in multilevel assemblies; wire and cable list data; definition of wire, cable and connector features. additive manufacturing part design build information. requirements management verification and validation.	01/01/1970
ISO/ASTM DIS 52927 Additive manufacturing — General principles — Main characteristics and corresponding test methods	40.60 UNDER DEVELOPMENT Enquiry: Close of voting	Metais; Cerâmicos; Polímeros		01/01/1970
ISO/ASTM DIS 52908 Additive manufacturing of metals — Finished Part properties — Post-processing, inspection and testing of parts produced by powder bed fusion	40.99 UNDER DEVELOPMENT Enquiry: DIS approved for registration as FDIS	Metais	-------	01/01/1970
ISO/ASTM WD 52937 Additive Manufacturing of metals — Qualification principles — Qualification of designers	20.98 DELETED Preparatory: Project deleted	Metais; Cerâmicos; Polímeros		01/01/1970
ISO/ASTM CD 52928 Additive manufacturing — Feedstock materials — Powder life cycle management	30.99 UNDER DEVELOPMENT Committee: CD approved for registration as DIS	Metais; Cerâmicos; Polímeros		01/01/1970
ISO 17296-2:2015 Additive manufacturing — General principles — Part 2: Overview of process categories and feedstock	90.93 PUBLISHED Review: International Standard confirmed	Metais; Cerâmicos; Polímeros	ISO 17296-2:2015 describes the process fundamentals of Additive Manufacturing (AM). It also gives an overview of existing process categories, which are not and cannot be exhaustive due to the development of new technologies. ISO 17296-2:2015 explains how different process categories make use of different types of materials to shape a product's geometry. It also describes which type of material is used in different process categories. Specification of feedstock material and requirements for the parts produced by combinations of different processes and feedstock material will be given in subsequent separate standards and are therefore not covered by ISO 17296-2:2015. ISO 17296-2:2015 describes the overreaching principles of these subsequent standards.	01/01/1970
ISO/ASTM DTR 52905 Additive manufacturing of metals — Non-destructive testing and evaluation — Defect detection in parts	30.98 DELETED Committee: Project deleted	Metais		01/01/1970
ISO/ASTM DTR 52913-1 Additive manufacturing — Feedstock materials — Part 1: Parameters for characterization of powder flow properties	30.92 UNDER DEVELOPMENT Committee - CD referred back to Working Group	Metais; Cerâmicos; Polímeros		01/01/1970
ISO 17296-4:2014 Additive manufacturing — General principles — Part 4: Overview of data processing	95.99 WITHDRAWAL Withdrawal of International Standard	Metais; Cerâmicos; Polímeros	ISO 17296-4:2014 covers the principal considerations which apply to data exchange for additive manufacturing. It specifies terms and definitions which enable information to be exchanged describing geometries or parts such that they can be additively manufactured. The data exchange method outlines file type, data enclosed formatting of such data and what this can be used for. ISO 17296-4:2014 enables a suitable format for data exchange to be specified, describes the existing developments for additive manufacturing of 3D geometries, outlines existing file formats used as part of the existing developments, and enables understanding of necessary features for data exchange for adopters of the International Standard. ISO 17296-4:2014 is aimed at users and producers of additive manufacturing processes and associated software systems. It applies wherever additive processes are used, and to the following fields in particular: production of additive manufacturing systems and equipment including software; software engineers involved in CAD/CAE systems; reverse engineering systems developers; test bodies wishing to compare requested and actual geometries.	01/01/1970
ISO/ASTM CD 52904 Additive manufacturing of metals — Process characteristics and performance — Metal powder bed fusion process to meet critical applications	30.99 UNDER DEVELOPMENT Committee: CD approved for registration as DIS	Metais	1.1 This practice describes the operation and production control of metal powder bed fusion (PBF) machines and processes to meet critical applications such as commercial aerospace components and medical implants. The requirements contained herein are applicable for production components and mechanical test specimens using powder bed fusion (PBF) with both laser and electron beams. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appro-priate safety, health, and environmental practices and deter-mine the applicability of regulatory limitations prior to use. 1.3 This international standard was developed in accor-dance with internationally recognized principles on standard-ization established in the Decision on Principles for the Development of International Standards, Guides and Recom-mendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.	01/01/1970
ISO/ASTM 52910:2018 Additive manufacturing — Design — Requirements, guidelines and recommendations	90.92 PUBLISHED Review: International Standard to be revised	Metais; Cerâmicos; Polímeros	This document gives requirements, guidelines and recommendations for using additive manufacturing (AM) in product design. It is applicable during the design of all types of products, devices, systems, components or parts that are fabricated by any type of AM system. This document helps determine which design considerations can be utilized in a design project or to take advantage of the capabilities of an AM process. General guidance and identification of issues are supported, but specific design solutions and process-specific or material-specific data are not supported. The intended audience comprises three types of users: — designers who are designing products to be fabricated in an AM system and their managers; — students who are learning mechanical design and computer-aided design; and — developers of AM design guidelines and design guidance systems.	01/01/1970
ISO/ASTM 52903-2:2020 Additive manufacturing — Material extrusion-based additive manufacturing of plastic materials — Part 2: Process equipment	90.93 PUBLISHED Review: International Standard confirmed	Polímeros	This document describes a method for defining requirements and assuring component integrity for plastic parts created using material extrusion based additive manufacturing processes. It relates to the process, equipment and operational parameters. Processes include all material extrusion based additive manufacturing processes. This document is intended for use by AM users and customers procuring such parts.	01/01/1970
ISO/CD 5425 Specifications for use of poly(lactic acid) based filament in additive manufacturing applications	30.60 UNDER DEVELOPMENT Committee: Close of voting/ comment period	Metais; Cerâmicos; Polímeros	ISO / CD 5425 Especificações para uso de filamento à base de poli (ácido lático) em aplicações de Fabrico aditivo	01/01/1970
ISO/ASTM DTR 52952 Additive Manufacturing of metals — Feedstock materials — Correlating of rotating drum measurement with powder spreadability in PBF-LB machines	30.99 UNDER DEVELOPMENT Committee: CD approved for registration as DIS	Metais	-------	01/01/1970
ISO/ASTM AWI 52945 Additive manufacturing for Automotive — Qualification principles — Generic machine evaluation and specification of Key Performance Indicators for PBF-LB/M processes	40.00 UNDER DEVELOPMENT Enquiry: DIS registered	Metais	This document defines the methodology for generic AM-machine evaluation in automotive environment using objective test criteria and provides the framework for an objective AMmachine evaluation and comparison. This document finds application in benchmarks, preparation of purchase decisions, but also AM-machine evaluation within the machine procurement, acceptance, and qualification process. The methodology and performance characteristics are introduced to enable evaluation on an objective and quantitative basis. The documentation resulting from the AM-machine evaluation is used to obtain a reliable orientation selection and evaluation of PBF-LB/M AM-machines. Furthermore, this document specifies machine KPIs in the context of machine procurement, production planning and production of PBF-LB/M components. It aims to reach a detailed understanding between machine supplier and machine customer with respect to the acceptance criteria during the procurement process and evaluation of machine performance during running production. This document is applicable to the additive manufacturing technology LPBF-M defined in ISO/ASTM 52900.	01/01/1970
ISO/ASTM CD 52939 Additive Manufacturing for construction — Qualification principles — Structural and infrastructure elements	30.99 UNDER DEVELOPMENT Committee: CD approved for registration as DIS	Outros	-------	01/01/1970
ISO/ASTM AWI 52908 Additive manufacturing — Post-processing methods — Standard specification for quality assurance and post processing of powder bed fusion metallic parts	20.98 DELETED Preparatory: Project deleted	Metais	-------	01/01/1970
ISO/ASTM AWI 52943-2 Additive manufacturing for aerospace — Process characteristics and performance — Part 2: Directed energy deposition using wire and arc	30.20 UNDER DEVELOPMENT Committee: CD study/ballot initiated	Outros	This document specifies requirements for the additive manufacturing of metallic parts with directed energy deposition in the aerospace industry. These can be additively generated parts or additively generated additions to existing parts. Within the application scope of this document, wire is used as feedstock, and arc processes (gas-shielded metal arc processes, Tungsten inert gas processes, plasma arc processes) are the main energy source. This document is to be used in conjunction with the engineering documents, if required by the engineering authority.	01/01/1970
ISO/ASTM WD 52919-2 Additive manufacturing — Qualification principles — Part 2: Physical properties of sand mold for metalcasting	20.98 DELETED Preparatory: Project deleted	Metais	-------	01/01/1970
ISO/ASTM WD 52919-1 Additive manufacturing — Qualification principles — Part 1: Mechanical properties of sand mold for metalcasting	20.98 DELETED Preparatory: Project deleted	Metais	-------	01/01/1970

Generated by wpDataTables